Miele K 14827 SD, Инструкции по эксплуатации и монтажу

Страница: 56 / 64

Changing the bearing
Important! The height of the
appliance door can be adjusted on
this stainless steel appliance.
Please take note of the different
conversion and fitting
instructions.
From "Fitting the appliance door"
onwards, the conversion and
fitting instructions are the same
for all appliances.
A. For appliances without height
adjustment (white appliance)
^
Pull hinge pin
a
with disc
b
and foot
c
upwards to remove them.
^
Remove cap
d
.
^
Undo screws
e
and take hinge plate
f
off.
^
Unscrew bearing
h
from hinge plate
f
, rotate it by 180° and refit into the
hole on the opposite side of the hinge
plate.
^
Place cap
d
in the other hole.
^
Remove cover
g
and fit it into the
holes on the opposite side.
^
Screw hinge plate
f
into position on
the opposite side using the two outer
long slots only. Do not use the
middle screw because you will not
be able to align the door over the
outer long slots later on.
^
Important! Screw foot
c
into hinge
pin
a
as far as it will go.
^
Reinsert hinge pin
a
with disc
b
and
foot
c
. Important! The lug on the
hinge pin must face backwards.
B. For appliances with height
adjustment (stainless steel
appliance)
^
Undo grub screw
d
with a full turn of
the Allen key supplied.
^
Unscrew hinge pin
a
with disc
b
and foot
c
and pull upwards to
remove them.
^
Remove cap
e
.
^
Undo screws
f
and take hinge plate
g
off.
Changing the door hinging
56