Miele K 14827 SD Скачать руководство пользователя страница 54

Страница: 54 / 64

Slide SoftClose mechanism bracket

as far as it will go towards the

handle side of the door, and undo
screws

on the SoftClose

mechanism.

Using a flat-bladed screwdriver, slide
the SoftClose mechanism towards
the handle side of the door, and lever
it out at the side.

Then place it to one side.

Changing over the door

Remove any food from the door
shelves.

Close the appliance door.

Remove cover

by sliding it

forwards from the back and then
lifting it off.

Remove cover

by pulling it

upwards.

Caution! The appliance door is not
secure once the hinge plate has
been removed.

Loosen screws

in upper hinge

plate

and pull it upwards and off.

Carefully lift the door off and place it
to one side.

Gently loosen cover

by carefully

inserting a flat-bladed screwdriver
into the gap.

Remove cover

together with

retaining plate

Changing the door hinging

Содержание K 14827 SD

































































Результаты поиска

Содержание K 14827 SD

Отзывы:

Бренды по названию

Популярные бренды

Miele K 14827 SD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 14827 SD

Отзывы:

Бренды по названию

Популярные бренды