Miele K 14827 SD Скачать руководство пользователя страница 46

Страница: 46 / 64

Demonstration mode

The appliance can be displayed in the
demonstration mode. When this is
activated, the controls and lighting are
functional but the cooling system
remains switched off.

Activating and deactivating
the demonstration mode

Switch on the appliance.

Touch and leave your finger on the

sensor.
At the same time, briefly touch the
On/Off sensor (without letting go of
the

sensor).

Touch the

sensor four times and

then leave your finger on the sensor
at the fifth touch until

appears in the

display.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

By touching the

sensor, you can

now select whether the
demonstration mode is switched on
or off:

n 0

: Demonstration mode is

deactivated

n 1

: Demonstration mode is activated

–: Return to menu

The old setting lights up, and your
newly selected setting flashes.

Touch the On/Off sensor to confirm
the new setting.

Touch the

sensor repeatedly until

appears in the display.

Touch the On/Off sensor.

You have now left settings mode.

The demonstration mode is
activated/deactivated.

Information for Chartered Agents

Содержание K 14827 SD

































































Результаты поиска

Содержание K 14827 SD

Отзывы:

Бренды по названию

Популярные бренды

Miele K 14827 SD, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание K 14827 SD

Отзывы:

Бренды по названию

Популярные бренды