Programme sequence
The programme will start automatically
as soon as the Start button has been
pressed. It is finished when
PROGRAMME END appears in the
display and the background lighting
flashes (press any button to stop it
flashing).
See "System functions" in the
programming manual for further
information on switching it off.
Detailed information on programme
sequences is given in the appendix
to the Programming Manual.
The display background lighting
goes out automatically after approx.
15 mins. To bring it back on again,
press one of the buttons.
,
On machines with a built-in
printer you must not change the
colour ribbon cartridge or the paper
roll whilst a programme is in
progress.
Switching off
^
Press and release the
I-0
button.
^
Turn off the stopcocks.
Cancelling a programme
A programme can only be cancelled
in operating level B or D.
In operating levels B or D
^
Press the
7
button. The programme
is interrupted.
^
If the water temperature is below
40 °C, CANCEL OR
ü
CONTINUE<,
will appear in the display, and if it is
above 40 °C
ü
CANCEL< will appear
in the display.
,
If there is a lot of hot water in the
wash cabinet when the programme
is interrupted and the door is then
closed quickly, hot water can
escape.
Danger of burning or scalding.
^
Use cursor button
1
to select
ü
CANCEL<; the
ü
< cursors will start
flashing.
^
Press the Start button
6
. The
programme is cancelled and the
water drained away. WATER DRAIN
will appear in the display.
^
After the water has been pumped
away the required programme can
be selected and started again.
Operation
39
Содержание IR 6002
Страница 59: ...59 ...
Страница 60: ...Alteration rights reserved Publication date 17 06 2010 M Nr 06 828 452 00 ...