Problem solving guide
135
Problem
Possible cause and remedy
The oven lighting does
not switch on.
The halogen lamp needs replacing.
Danger of burning!
Make sure the oven heating elements are switched
off and that the oven cavity is cool.
The lamp cover consists of two parts: a glass
piece and a mounting. It may be damaged if it is
dropped.
Hold the lamp cover securely when removing it so
that it does not fall. Place a tea towel over the floor
of the oven and the open door to protect them.
Disconnect the appliance from the mains. Switch
off at the wall and withdraw the plug from the
socket, or switch off at the mains circuit breaker.
Remove the screw to the lamp cover using a T20
Torx screwdriver, and take off the cover.
Do not touch the halogen lamp with bare fingers.
Please follow the manufacturer's instructions.
Pull the halogen lamp out.
Replace it with a new halogen lamp (Osram 66725
AM/A, 230 V, 25 W, G9). It must be thermally
stable up to 300 °C.
Replace the glass piece in the mounting, and refit
the lamp cover. Make sure that the lug on the
mounting is correctly located in the notch in the
roof of the oven, then screw the mounting back
into place.
Reconnect the oven to the electricity supply.
Содержание H6800BMX
Страница 144: ...M Nr 10 484 010 02 en AU NZ H6800BMX ...