Miele H6160B, Инструкции по эксплуатации и монтажу

Страница: 60 / 172

Steam can cause injury by scalding.
Do not open the door while the burst of steam is being injected.
Condensation on the sensors will make them react more slowly.
Automatic burst of steam
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
The following will appear in the display:
i60
°C
*
The water will vaporise in the oven
compartment.
After the burst of steam,
*
will go out
and the temperature will be displayed.
^
Continue cooking until the end of the
cooking duration.
Injecting bursts of steam manually
The bursts of steam can be injected as
soon as
*
lights up in the display.
Please wait until the heating-up
phase is completed to allow the
steam to be distributed evenly by
the warm air in the oven.
Please refer to the recipes for the timing
of the bursts of steam.
Tip: Set the minute minder
N
to remind
you.
^
Touch
*
to inject the burst of steam.
The sensor light goes out and the
following appears in the display:
i60
°C
*
^
Proceed as described to inject
further bursts of steam.
After the last burst of steam
*
will go
out and the temperature will be
displayed.
^
Continue cooking until the end of the
cooking duration.
Moisture plus
d
60