,
The oven must be built into its
housing unit before it can be used.
In order to function correctly, the
oven requires an adequate supply
of cool air.
Ensure that the supply of cool air is
not impaired:
– do not fit a back panel in the
housing unit.
– the unit shelf on which
the oven sits must not
touch the wall behind it.
– do not fit insulation
to the side walls of the
housing unit.
Please also ensure that the cool air
supply is not unduly heated by other
heat sources such as a wood
burning stove.
Before installation
^
Before connecting the oven to the
mains, you must disconnect the
power supply to the oven isolator
switch.
Installing the oven
^
Connect the mains cable from the
oven to the isolator.
Lifting the oven by the door handle
can damage the door.
It is advisable to remove the door
before installing the appliance (see
"Cleaning and Care - Removing the
door") and remove accessories from
the oven cavity. This will make it easier
to install in its niche and you will not be
tempted to use the handle to carry it.
Remove the carry handles at the
sides.
^
Push the oven into the housing unit
and align it.
^
Open the door (if you have not
removed it previously).
^
Use the screws supplied to secure
the oven to the side walls of the
housing unit through the holes in the
oven trim.
^
Refit the door, if necessary (see
"Cleaning and care - Refitting the
door").
Installing the oven
67
Содержание H6090B
