Correcting minor faults
Installation, maintenance and re-
pairs to the electrical components
of this appliance should only be car-
ried out by a fully competent person
to ensure safety. Repairs and other
work by unqualified persons could
be dangerous. The manufacturer
cannot be held responsible for un-
authorized work.
Some minor problems however can be
dealt with as follows:
What to do if . . .
. . . the oven does not heat up.
the selector switch is set to the func-
tion required,
and
the temperature
control is set at the correct tempera-
ture.
the operating lock is activated (lower
oven).
the main fuse has blown. Contact a
qualified electrician or the Miele Ser-
vice Department.
. . . "12:00" flashes in the timer dis-
play.
This is not a fault.
There has been an interruption to the
power supply.
After a power cut
– the time of day has to be entered
again,
– the operating lock has to be reacti-
vated.
. . . the heating works, but not the
oven lighting.
The bulb needs changing:
Disconnect the appliance from the
electricity supply:
Switch off at the isolator or the mains
fuse box.
Remove the runners.
Lift the lamp cover from its retainers.
Change the bulb:
12 V, 20 W, G4 socket, Osram
heat resistant to 300°C, Type 64428.
Press the lamp cover back in its
retainers and put the runners back.
Reassemble
in the reverse order, care-
fully ensuring all parts are correctly in
place.
Correcting minor faults
46
Содержание H 283 B2
Страница 4: ...Description of the appliance Description of the appliance 4 ...
Страница 54: ...54 ...
Страница 55: ...55 ...