Miele G 7882, Руководство по эксплуатации

Страница: 26 / 68

This washer disinfector normally re-
quires a top and bottom basket.
Various inserts and special baskets are
also available for a wide variety of in-
struments and utensils.
The diversity of inserts and baskets
means that it is not possible to illustrate
them all or give detailed instructions on
their use here.
This machine complies with strict re-
quirements for cleaning and disinfect-
ing, whereby long or narrow necked
hollow instruments must be directly
flushed with hot suds inside.
Loading the machine
Preparation
^
Empty all containers before loading
into the machine (paying particular
attention to regulations regarding epi-
demics).
,
Ensure that no acid or solvent
residues, especially hydrochloric
acid or chlorides get into the wash
cabinet.
Note
^
Load items so that water will come
into contact with all surfaces. This en-
sures that they will be properly
cleaned.
^
Do not place items to be cleaned in-
side other pieces where they may be
concealed.
^
Hollow items should be inverted and
placed in the correct inserts. The wa-
ter must be able to access them un-
hindered.
^
Deep based items should be placed
at an angle to ensure good coverage
of water.
^
Tall, narrow pieces should be placed
in the centre of the baskets to ensure
better water coverage.
^
The spray arms must not be blocked
by items which are too tall or which
hang down in their path. If necessary,
manually rotate the arms to test.
^
In order to avoid corrosion, it is rec-
ommended that only surgical steel in-
struments are cleaned in the ma-
chine.
^
Nickle plated instruments and col-
oured anodised aluminium instru-
ments are not suitable for machine
preparation.
^
Use the CHEM 60°C-5’ and
combiCHEM 60°C-5’ programme for
instruments which cannot withstand
heat (thermolabile).
^
Disposable instruments must not be
put into the machine for processing.
^
Mobile units with adapters must en-
gage correctly (see next page).
Loading the machine
26