Switching the machine on and off
Programme sequence
indicator
When a washing programme has been
selected, the indicator lights in the dis-
play will show the programme se-
quence.
I
Pre-wash
l
Wash
m
Intermediate rinse
H
Final
rinse
c
Drying (additional programme)
When a programme section is com-
plete, the corresponding indicator light
goes out. The whole programme is
completed when no indicator lights are
left on and the "Start"
h
light goes
out.The display will show the total run-
ning time of the programme.
Switching off
Press the I-0 button and let it spring
out. The dishwasher can be opened
and unloaded at this stage.
Interrupting a programme
Once a programme is running, it
should only be interrupted in extreme
cases, eg, when articles in the dish-
washer rattle or bump against each
other and have to be rearranged.
The machine must then be switched
off, the water drained and the pro-
gramme restarted:
Switch the machine off and then on
again, (I-0 button).
Select the "DRAIN" programme (Ad-
ditional programme).
Open the door and replace the ar-
ticles securely and correctly,
(wear protective gloves when deal-
ing with infected items).
Replenish the powder detergent dis-
penser in the door if necessary.
Close the door.
Reselect the programme.
Switching the machine on and off
23
Содержание G 7764 SUPER-COMBI
Страница 41: ...Technical data Noise emission in A Noise level 65 Technical data 37 ...
Страница 42: ...38 ...
Страница 43: ...39 ...