Miele G 7764 SUPER-COMBI, Руководство по эксплуатации

Страница: 31 / 44

Position the salt container as
follows:
Remove the bottom basket from the
machine.
Unscrew the plastic cap in the base
of the wash cabinet.
Place the salt container on the reacti-
vation socket and screw firmly into
place.
Switch on the dishwasher
Open the stopcocks.
Close the door.
Press the I-0 button.
Press the
k touchpad.
Press the "Start" h touchpad.
The reactivation programme proceeds
automatically and finishes when the
check light
k , on the left hand side of
the control panel and the "Start" indicator
light
h have gone out.
Then:
Switch off the dishwasher.
Unscrew the salt container carefully,
so that any water pressure that has
built up can be released. Do not use
force. If you cannot unscrew the salt
container by hand, contact the Miele
Service department.
Screw the plastic lid back on the
socket.
Reposition bottom basket.
Rinse the salt container and filter in-
sert thoroughly.
Turn off the stopcocks.
Important
The water pressure (flow pressure at the
take off point) must be at least 2.5 bar.
If the flow pressure is below 2.5 bar, or
if it fluctuates,the water softener cannot
be reactivated in the normal way. After
reactivation, salt remains may still be
found in the salt container.
To use up salt remains and to wash out
the water softener, the "reactivate sof-
tener" programme must be switched on
again.
Reactivating the water softener
27