Operation
49
End of programme
The programme has ended when the
display shows the message
Finished
.
In some programmes, if the AutoOpen
function is activated, the door will
automatically open slightly (see
“Settings” chapter, “AutoOpen”
section). This improves the drying
process.
If the
Consumption
programmable
function is switched on, you can now
call up the actual energy and water
consumption of the programme that
has just finished (see “Caring for the
environment” chapter, “EcoFeedback
consumption indicator” section).
The drying fan may continue to run for
a few minutes at the end of the
programme.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
If you have deactivated the
automatic door opening function (see
“Settings” chapter, “AutoOpen”
section), but would still like to open
the door at the end of the
programme, then make sure that you
open the door fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the
button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Содержание G 7100C
Страница 90: ......
Страница 92: ...M Nr 11 708 100 02 en SG G 7100C G 7105C ...