Miele G 7100C, Руководство по эксплуатации

Страница: 33 / 92

Caring for the environment
33
EcoFeedback consumption
indicator
The Consumption function is used for
calling up information about the energy
and water consumption of your
dishwasher (see “Settings” chapter,
“Consumption” section).
The following information can be shown
on the display:
- An estimate of the consumption
before the programme begins
- The actual consumption at the end of
the programme
- The total consumption of the
dishwasher
1. Consumption estimate
After a programme has been selected,
first the name of the programme and
after a few seconds the estimated
energy consumption

and water
consumption

will appear in the
display.
The estimated consumption will be
shown as a bar chart. The more bars
that are visible (
   ), the higher the
energy or water consumption.
The values are influenced by the
programme, any programme options
selected, the ambient conditions and
the size of the load.
The display will change automatically
from showing the estimated
consumption to showing the time
remaining.
The estimated consumption function is
activated as standard. This function can
be deactivated, if preferred (see
“Settings”, “Consumption” section).
2. Display consumption
At the end of the programme you can
call up the actual amount of energy and
water used by the programme that has
just been run.
 Confirm the
Consumption
(OK) message with OK .
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the
programme that has just been run.
3. Total consumption
You can view the total consumption of
energy and water for all previously used
programmes of your dishwasher (see
“Settings” chapter, “Consumption”
section).