Miele G 690 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 80

Miele G 690 Скачать руководство пользователя страница 16

Hardness level 650 - 1260 mg/l

(36 - 70 °d German scale)

Switch off the dishwasher.

Press and hold in the "

+

" and

"START/Stop" buttons, and at the
same time switch on the dishwasher
with the "ON/OFF " button.
"P" and two figures appear in the
time display.

Press the "UNIVERSAL 55 °" pro-
gramme button.
A figure appears in the display corre-
sponding to the water hardness level
already set, e.g. "22" – the water sof-
tener is set to a water hardness level
of 400 mg/l (22 °d German scale).

Keep pressing the "Top Solo" button
until "36" appears in the display.

Once the figure "36" is reached the
counter returns to "1".

Press the “START/Stop” button.

“SP” appears in the time display.

Press the “START/Stop” button again.

All the control lights next to the pro-
gramme selection buttons and the deci-
mal point in the time display light up.

The change to water hardness recogni-
tion is now stored in memory.

In addition the water hardness selector
in the wash cabinet must be set accord-
ing to the chart.

°d

mgl/l

°f

Value for

program-

ming

Water-

hardness
selector
(Settings)

36-47

650-850

65-85

36

4

48-65 860-1170 86-117

36

5

66-70 1190-1260 119-126

36

6 *)

*) factory setting

Example:

Water hardness is 920 mg/l (52 °d).

The water hardness selector must be
turned to setting 5 (48 - 65 °d).

Switch the dishwasher off.

Use a screwdriver to remove the lid
of the water hardness level selector
in the wash cabinet.

Check that the selector is set to set-
ting 6 (factory setting). If not, use a
flat blade screwdriver or a coin to
turn the selector until it clicks on set-
ting 6.

For technical reasons do not set the
selector to setting 1 - 3.

Water softener

16

«
...
14
15
16
17
18
...
»

Содержание G 690

















































































Отзывы:

Нет отзывов