background image

Installation

50

Climate range

This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use in ambient temperatures for which it
is not designed.
A lower room temperature leads to the
compressor switching off for longer
periods. This can cause the internal
temperature in the appliance to rise with
the risk of food deteriorating and going
off.

The climate range is stated on the data
plate inside the appliance.

Climate range

Ambient room

temperature

SN

+10 to +32 °C

N

+16 to +32 °C

ST

+16 to +38 °C

T

+16 to +43 °C

Ventilation

Risk of fire and damage due to

insufficient ventilation!
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods. This will
result in increased energy
consumption and a higher operating
temperature of the compressor. This,
in turn, can result in damage to the
compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.

Air at the back of the appliance gets
warm.

Содержание FN 28262 edt/cs

































































Отзывы: