Miele FN 28262 edt/cs Скачать руководство пользователя | Manualshive

Страница: 55 / 64

background image

Changing the door hinging

55

The appliance is supplied with left-hand
hinging. If right-hand hinging is
required, the hinges must be changed.

Please note that the hinging must not
be changed if this appliance is going to
be installed side by side with another
refrigeration appliance.



Two people are needed for

changing the door hinging.

If a door seal is damaged or has
come out of the groove, the door will
not close properly and cooling
performance will be reduced.
Condensate will build up in the
interior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.

Preparing to change the door hinging

To change the door hinging, you will
need the following tools:



Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.

Removing the top covers



Close the appliance door.



Remove the cover



by sliding it

forwards from the back and then
lifting it off.



Remove the cover



by pulling it

upwards.



Danger of injury when removing

the appliance door!
The appliance door is no longer
secure once the screws in the hinge
plate have been removed.
Hold the appliance door firmly.

«
...
53
54
55
56
57
...
»

Содержание FN 28262 edt/cs

































































Отзывы:

Нет отзывов

Похожие инструкции для FN 28262 edt/cs

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 16

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 8

Бренд: Haier Страницы: 16

SPEED POUR TOWER

Бренд: Jägermeister Страницы: 8

Бренд: Maytag Страницы: 2

Бренд: montpellier Страницы: 29

Бренд: EAS Electric Страницы: 56

Бренд: Bertazzoni Страницы: 128

Бренд: TECMACH Страницы: 14

Бренд: SCAN domestic Страницы: 14

Бренд: Scan Cool Страницы: 43

Бренд: Enconnex Страницы: 48

Бренд: Signature Kitchen Suite Страницы: 82

Бренд: Vesta Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды