Miele FN 22062 ws Скачать руководство пользователя страница 41

Страница: 41 / 60

What to do if ...

Display warnings

Message

Cause and remedy

The



symbol lights up

in the display, the appli-
ance does not get cold,
although the appliance
controls are working.

Demo mode

is activated. This allows the appliance to

be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.



Contact Miele Service for instructions on how to
switch Demo mode off.



is lit up in the display

and the appliance can-
not be used.

The

safety lock

has been activated.



Deactivate the safety lock temporarily or switch it
off completely (see "Selecting settings - Activating
or deactivating the safety lock").

The buzzer is sounding
and the



symbol and

the temperature display
are flashing.

The

temperature alarm

has been activated (see

"Temperature and door alarm"). The temperature in
the freezer section is too warm or too cold.
This could be due to, for example:

– the appliance door being opened too often, or be-

ing left open.

– a large quantity of fresh food being placed in the

freezer at once without switching on the Super
freeze function.

– a lengthy interruption of the power supply.



Rectify the cause of the alarm.



will go out.

Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.

A buzzer is sounding.

The

door alarm

has been activated.



Close the appliance door. The buzzer will stop.

The



symbol and the

temperature display are
flashing.

This indicates an

appliance fault



Call Service.

Содержание FN 22062 ws





























































Результаты поиска

Содержание FN 22062 ws

Отзывы:

Похожие инструкции для FN 22062 ws

Бренды по названию

Популярные бренды

Miele FN 22062 ws, Инструкции по эксплуатации и монтажу

Результаты поиска

Содержание FN 22062 ws

Отзывы:

Похожие инструкции для FN 22062 ws

Бренды по названию

Популярные бренды