Changing the door hinging
52
Remove the door
Danger of injury when removing
the door.
The appliance door is not secure
once the hinge pin has been re-
moved.
The door must be held by a second
person.
Carefully tip the appliance back with
the help of a second person, and un-
screw the safety screw
from the
right hand lower hinge plate
.
Open the appliance door.
Hold the appliance door on the
handle side and at the bottom, and
carefully lift it off. Hinge pin
with
washer
will be released from hinge
plate
.
If it does not release itself:
Press hinge pin
together with
washer
out of the hinge plate from
underneath.
If the hinge components (hinge
plate and hinge pin) are not screwed
in tightly enough, the door can fall off
or may not close properly. Cooling
will be less efficient, and condensate
will build up in the interior and this
can cause a build-up of ice.
Screw the hinge plate and the hinge
pin in securely.
Check all screws and tighten if ne-
cessary.
Changing the lower hinge plate
over
Undo the screws
and remove the
hinge plate
.
Slightly loosen the screw in hinge
part
on hinge plate
. Screw it
into the opposite hole in hinge
plate
and then tighten the screws.
Remove stopper
and fit it in the
opposite hole in the hinge plate.
Remove cover
.
Take screw
out and screw it into
the outside hole on the opposite side.
Turn cover
through 180° and refit it
on the opposite side.
Содержание FN 22062 ws
Страница 57: ......
Страница 58: ......
Страница 60: ...M Nr 10 698 510 00 en GB FN 22062 ws FN 24062 ws FN 26062 ws FN 28062 ws ...
