Miele FM3 Скачать руководство пользователя

Страница: 67 / 80

Frequently asked questions

Problem

Possible cause and solution

The temperature of the
iron is always high.

There is a fault.



Contact Miele.

The cover of the ironing
board is damp.

There is a fault.



Remove the ironing board cover and allow it to
dry.



Put the dry ironing board cover back on (see
"Cleaning or replacing the ironing board cover").

If the ironing cover gets damp again, contact Miele
Service.

Water is leaking from
the steam ironing sys-
tem at the height of the
water container when it
is being moved.

The frequent removal and replacement of the water
container may cause water droplets to collect in the
area under the water container.



Use a cloth to dry the area underneath the water
container.

The fan on the ironing
board is not running.

Steam was not used.



The fan only runs when the steam function on the
iron is activated.

The steam is not ready yet.



Wait until the message



Ready

is displayed to in-

dicate that steam is ready.

The water container is empty or missing.



Fill the water container with fresh tap water and in-
sert it into the appliance.

The steamer is connected.



The fan only runs when the iron is connected.
Connect the iron.

There is a fault.



Contact Miele Service.

Содержание FM3

















































































Результаты поиска

Содержание FM3

Отзывы:

Похожие инструкции для FM3

Бренды по названию

Популярные бренды

Miele FM3, Руководство по эксплуатации

Результаты поиска

Содержание FM3

Отзывы:

Похожие инструкции для FM3

Бренды по названию

Популярные бренды