manualshive.com logo in svg

Miele F 2462 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 Vi Скачать руководство пользователя страница 85

Selecting additional settings

85

Switching on the 

Water Filter Display

If the 

Water Filter Display

 has been

switched off once, it must be switched
on again if required.

In Settings mode 

, use the 

 and

 sensor controls to select the 

Water

Filter Display

 and select 

OK

 to confirm

your selection.

Use the 

 and 

 sensor controls to

select 

On

 and select 

OK

 to confirm

your selection.

The 

Water Filter Display

 has been

switched on.

Switching off the 

Water Filter Display

Risk to health due to contami-

nated water.
If the IntensiveClear 2.0 charcoal fil-
ter is not replaced on a regular basis,
it may become contaminated.
Only switch off the 

Water Filter Display

if an external water filter has been at-
tached to your household water sup-
ply in place of the IntensiveClear 2.0
charcoal filter. In this case, you
should also use an IntensiveClear 2.0
mesh filter in place of the Intensive-
Clear 2.0 charcoal filter (see “Acces-
sories – Optional accessories”).

In Settings mode 

, use the 

 and

 sensor controls to select the 

Water

Filter Display

 and select 

OK

 to confirm

your selection.

Use the 

 and 

 sensor controls to

select 

Off

 and select 

OK

 to confirm

your selection.

The 

Water Filter Display

 has been

switched off.

Resetting the 

Water Filter Display

 

After you have replaced or cleaned the
water filter, you must reset the 

Water Fil-

ter Display

 so that it can be displayed

again after 6 months.

If you do not reset the display, it ap-
pears again and again.

In Settings mode 

, use the 

 and

 sensor controls to select the 

Water

Filter Display

 and select 

OK

 to confirm

your selection.

Use the 

 and 

 sensor controls to

select 

Reset

 and select 

OK

 to confirm

your selection.

The 

Replace the water filter

 message dis-

appears from the display.

The 

Water Filter Display

 has been acti-

vated for the next time the water filter
requires cleaning or replacing.

Содержание F 2462 Vi





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды