manualshive.com logo in svg

Miele F 2462 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 Vi Скачать руководство пользователя страница 117

Frequently Asked Questions

117

Problem

Possible cause and solution

Food has frozen to-
gether or to the wall.

The food packaging was not dry when loaded in the
freezer.

Use a blunt instrument (such as a spoon handle) to
carefully pry them apart.

An alarm sounds.

The appliance door has been open for longer than
3 minutes.

Close the appliance door.

No alarm sounds de-
spite the appliance door
being open.

You have switched off the audible signal.

Switch the audible signal back on using Settings
mode 

.

The 

Sabbath Mode

 

 function is switched on: the tem-

perature display is dark and the 

 symbol is shown

on the display.

You can switch off Sabbath mode at any time (see
“Selecting additional settings – Switching 

Sabbath

Mode

 

 on or off”).

The appliance door
cannot be opened.

The 

Pull2Open

 Door Assistant is switched on but the

appliance has a handle-free cabinet front.

For handle-free cabinet fronts, switch on the

Push2Open

 Door Assistant (see “Switching on the

Door Assistant” in “Selecting additional settings”).

The appliance door
cannot be opened when

Sabbath Mode

 

 is

switched on.

The 

Push2Open

 Door Assistant is switched on at the

same time as 

Sabbath Mode

.

When 

Sabbath Mode

 is switched on, the Door As-

sistant is deactivated.

Pull the appliance door open from below or from
the side.

Содержание F 2462 Vi





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды