manualshive.com logo in svg

Miele F 2462 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 Vi Скачать руководство пользователя страница 16

Installation

*INSTALLATION*

16

Risk of damage due to high hu-

midity.
In environments with high humidity,
condensation can build up on exter-
nal refrigeration appliance panels,
which can cause corrosion.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation, make sure that the
appliance door closes properly, the
ventilation gaps are not covered, and
the refrigeration appliance has been
installed in accordance with these
operating and installation instruc-
tions.

Installation notes

Risk of damage and injury due to

the refrigeration appliance tipping
over.
This refrigeration appliance is very
heavy and can tip forwards when the
appliance door(s) is (are) open.
Keep the appliance door(s) shut until
the refrigeration appliance has been
built in and secured in its housing in
accordance with these operating and
installation instructions.
Due to its weight and size, the refrig-
eration appliance must be installed
by two people.

Adjoining cabinetry/units

The appliance is screwed to the adjoin-
ing cabinetry/units to the side and
above. For this reason, it is essential
that all cabinets/units are fixed to the
ground and/or wall.

Содержание F 2462 Vi





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды