manualshive.com logo in svg

Miele F 2462 Vi, Инструкции по эксплуатации и монтажу

Поделиться
Скачать
Miele F 2462 Vi Скачать руководство пользователя страница 100

Operating the Ice/Water dispenser

100

Empty and clean the ice container at
regular intervals, or at least if you
have not produced any ice for longer
than a week (see “Cleaning and care
– Emptying and cleaning the ice con-
tainer”).
This will ensure that you always have
fresh ice and the ice cubes will not
form a clump.

Switching off the Dispenser
Unit 

Close the faucet in the water supply
line approx. 3 hours before switching
off the appliance to avoid the build-
up of mold caused by stagnant water.

In Settings mode 

, use the 

 and

 sensor controls to select the 

Dis-

penser Unit

 and select 

OK

 to confirm

your selection.

Use the 

 and 

 sensor controls to

select 

Off

 and select 

OK

 to confirm

your selection.

The Ice/Water dispenser is now
switched off; the sensor controls in the
control panel are no longer highlighted
in white.

Switching the system lock on/
off

You can use the system lock to protect
the Ice/Water dispenser from unautho-
rized use, such as by children.

Touch the 

 sensor control until it is

highlighted in white and a short tone
sounds.

The remaining sensor controls of the
Ice/Water dispenser are now locked
and cannot be selected.

To switch off the system lock, touch
the 

 sensor control for approx.

3 seconds until it is no longer high-
lighted in white and a short tone
sounds.

Содержание F 2462 Vi





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды