Miele DGC7440W, Инструкции по эксплуатации и монтажу

Страница: 55 / 172

Operation
55
Cleaning the steam oven
 Remove the water container and
condensate container and empty
them as required.
 Switch the steam oven off.
Appliance rinsing appears after a cooking
programme involving steam.
 Follow the instructions in the display.
The rinsing process should be
carried out every time to flush any
remaining food deposits out of the
system.

After each use, clean and dry the
whole appliance as described in
“Cleaning and care”.

Leave the appliance door open until
the oven interior is completely dry.
Refilling the water
If water needs replenishing during the
cooking programme, a tone will sound
and the display will prompt you to refill
the container with fresh water.

Remove the water container and fill it
with fresh tap water.

Push the water container into the
appliance.

Close the control panel.
The cooking programme will continue.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can use the
 sensor to change
the values or settings for this
programme.
 Select the  sensor.
Depending on the function, the
following settings appear:
– Temperature
– Moisture
– Duration
– Booster
–
Pre-heat
– Crisp function
Changing values and settings
 Select the desired value or setting
and confirm with
OK .
 Change the value or setting and
confirm with
OK .
The cooking programme will continue
with the new values and settings.