Settings
47
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele@mobile App.
A message will appear in your steam
oven display if a software update is
available.
You can install the update immediately
or postpone this until later. When the
steam oven is switched on again, you
will be reminded about the update.
Switch RemoteUpdate off if you do not
wish to install updates.
The update can take several minutes.
Please note the following information
about the RemoteUpdate function:
– You will only receive a message when
an update is available.
– Once an update has been installed, it
cannot be undone.
– Do not switch the steam oven off
during the update. Otherwise, the
update will be aborted and will not be
installed.
– Some software updates can only be
carried out by a Miele service
technician.
Software version
The software version menu option is for
use by Miele service technicians. You
do not need this information for
domestic use.
Showroom programme
This function enables the steam oven to
be demonstrated in showrooms without
heating up. Do not activate this setting
for domestic use.
Demo mode
If you have activated Demo mode,
Demo mode is activated. The appliance will
not heat up
will appear when you
switch the steam oven on.
–
On
Touch the
OK
sensor for at least
4 seconds to activate Demo mode.
–
Off
Touch the
OK
sensor for at least
4 seconds to deactivate Demo mode.
You can use the steam oven as
normal.
Factory default
–
Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
–
User programmes
All User programmes will be deleted.
–
Recommended temps
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Содержание DGC7440W
