Before each use
^
Fill the water container.
You do not need to remove the insert.
Only use
mains tap water
. Never
use distilled or mineral water.
The water level must be between the
two markings (min. 0.75 l and max.
1.2 l). These are located inside and
outside the container. On no account
exceed the upper or maximum level
marker. Add water as required.
Using hot water from the kettle will
shorten the heating-up time.
^
Always use both hands when
carrying the water container, and
push it into the appliance until it
connects. Take care not to let any
water spill out.
^
Always push the condensate tray
onto the lowest shelf runner to catch
any condensate that may build up
during cooking.
Programming steps in brief
To make a selection you turn the
selector, and to confirm your selection
you push it in.
The function selector is used to:
A
Switch the appliance on by pushing
it in
B
To select and confirm a cooking
function
The time/temperature dial is used to:
C
Confirm the recommended
temperature or to change it and then
confirm the change
D
To select and confirm a cooking
duration
The programme cycle starts
automatically.
If you do not complete the
programming within 15 minutes, the
appliance will switch itself off.
The cooking functions and
programming steps are described in
more detail on the following pages.
Operation
20
