Miele DA 316 i, Руководство по эксплуатации и установке

Страница: 23 / 40

b
1 hose clip for securing the vent
ducting to the exhaust stub.
c
1 reducing collar
for exhaust ducting ø 100 mm.
c
1 reducing collar
for exhaust ducting ø 125 mm.
e
1 non-return flap
for fitting into the exhaust stub
f
2 runners
(1 x right, 1x left) to support the ap-
pliance in the wall unit.
g
2 side spacers
to cover the spaces at the side when fit-
ting in a 60 cm wide wall unit.
h
Facia slot
for inserting the active charcoal filter.
i
Grip
for the front panel.
j
1 spacer strip
to cover the gap between the rear of
the appliance and the wall.
k
1 light cover
with right and left holders
l
.
8 screws 4.0x16 mm
For securing the runners
f
in the wall unit.
6 self-tapping screws
3.5x9.5 mm
2 for securing the light cover
k
,
l
4 for securing the side spacers
g
.
1 strip with 3 adhesive
sections for attaching a
kitchen furniture lightshield to grip
i
.
7 screws 3.0x15 mm
2 for attaching the
grip
i
to the deflector plate; 5 for at-
taching a kitchen furniture lightshield to
grip
i
.
Screw driver for aligning the furniture
door after the appliance has been built
in.
Installation
23