Miele DA 316 i, Руководство по эксплуатации и установке

Страница: 27 / 40

5. Position the appliance in
the wall unit
Lift the cooker hood into the wall
unit, making sure that the supports
on the cooker hood are sitting on the
runners in the wall unit. Push it into
the wall unit as far as it will go.
The supports will slide under the anti-
tip device
b
.
Insert the adjusting screws
c
on the
runners through the holes in the sup-
ports.
Use a small screwdriver to push re-
tainer
d
down over adjusting screw
c
.
6. Align the height of the
appliance
Use screw
e
to align the height.
Now align the appliance so that it is
horizontal.
Turning screw
e
clockwise, raises the
appliance upwards, turning it anti-
clockwise lowers it.
Close the unit door and check that
the deflector plate goes in and out
smoothly. If necessary make more
adjustments as above.
Fit the lightshield before aligning the
depth.
Installation
27