Installation
32
Uneven installation surfaces
If the installation surface is uneven
making flush installation difficult, the
frame can be realigned.
Fit the rangehood as described on
the installation sheet.
Disconnect the rangehood from the
mains electrical supply before
replacing the lamps (see "Warning
and Safety instructions").
Insert the lever supplied into the gap
between the lamp and the lamp
holder.
The lamp will then drop downwards.
Grip the lamp, turn it anti-clockwise
and take it out.
Remove all other lamps in the same
way.
Fit one of the screws supplied into
each lamp holder.
Tighten the screws with a screwdriver
until the frame sits flush with the
installation surface.
Do not overtighten the screws!
Refit the lamps.
Содержание DA 2360
