,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
What if the burner does not heat up after it is turned on?
Possible fault
Solution
The Child safety lock is activated.
See "Child safety lock".
The Overheating protection feature
has activated.
See "Overheating protection".
The main fuse has blown.
Check the main fuse.
Replace the fuse or "trip" the circuit breaker.
The demo-mode is activated.
When demo mode is activated,
d
will appear in the display for a few
seconds after turning the
appliance on.
To de-activate, turn the control knob briefly
(approx. 1 sec) to the left, two times, all the
way to the stop, then turn it a third time and
hold for approx. 3 seconds.
If none of the above is the case, turn the control knob to "0", and disconnect the
appliance from the electrical supply for 1 minute.
Reconnect the power and turn the appliance on. If it still does not heat, contact
Miele Technical Service.
What if
ß
appears in the display?
Possible fault
Solution
The burner is turned on but no
cookware is placed on it.
Turn the burner off and place suitable
cookware on it.
The pan being used is not suitable
for the combiset or is not the right
size.
See "Cookware" for information on type and
size of suitable cookware.
What if an
F
appears in the display?
Possible fault
Solution
The temperature sensor for the
burner is faulty.
Do not use the combiset until it has been
repaired. Contact Miele Technical Service.
Frequently asked questions
25
