Before first use
20
Before using for the first time
Remove any notices from the
machine.
Remove the protective film from the
drip tray cover and place it into the
lower panel.
Place the coffee machine on a level
flat surface that is not sensitive to
water (see “Installation”).
Clean the coffee machine thoroughly
(see “Cleaning and care”) before
filling it with water and coffee beans.
Insert the plug of the coffee machine
into the socket.
Remove the water container and fill it
with fresh, cold tap water. Only fill the
container up to the “max.” mark and
then reinsert the water container.
Take the lid off the coffee bean
container, fill it with roasted coffee
beans, and replace the lid.
Tip:
The milk pipe can be stored behind
the service panel when not in use.
Turning on for the first time
Tap the On/Off button
.
Miele - Willkommen
appears briefly in the
display.
Use the arrow buttons
to
highlight the required language.
Tap
OK
.
You might also be asked for your
location.
Your machine has been successfully set
up and is ready for use.
Confirm with
OK
.
The coffee machine heats up and rinses
the pipework. The water used for
rinsing will run out of the main
dispenser.
Before preparing milk for the first
time, rinse the milk pipework (see
“Cleaning and care – Rinsing the milk
pipework”).
Содержание CM 5310
