Miele CM 5310, Руководство по эксплуатации

Страница: 62 / 76

Frequently Asked Questions
62
Problem Possible cause and solution
Fill the bean container ap-
pears in the display
even though the bean
container has just been
filled.
This is not a fault.
 Confirm the message with OK .
Insufficient coffee beans are getting into the grinder.
Have you used a dark roast?
This type of coffee bean is often oily. These oils can
cling to the inside of the coffee bean container and
hinder the flow of beans.

Make a coffee and observe whether the coffee
beans drop into the coffee bean container.

Clean the coffee bean container more often if you
are using a darker, more oily bean.
Try other types of coffee bean which are less oily.
The coffee machine
does not rinse itself
when turned on.
This is not a fault.
If the coffee machine is already at operating
temperature, rinsing will not take place when the
appliance is switched on.
Coffee dispensing is re-
peatedly interrupted
and the message
Fill the
bean container appears in
the display.
This is not a fault.
The brew unit has not detected the ground coffee.
Certain types of coffee produce a small amount of
coffee when they are ground. Usually the grinder is
set too fine and the amount is set to minimum.

Confirm the message with OK .
If the coffee is too strong for you or tastes bitter, try a
different type of coffee bean.
If the display appears with all types of coffee:
 Set the grinder to a coarser setting (see “Grinder
setting”).

Select a larger amount of coffee.
Don't forget to check any drinks changed in “User
profiles”.
If the message only appears when dispensing certain
drinks:

Check the amount of coffee set for this drink (see
“Amount of coffee”). Select a larger amount of
coffee.

You may also need to set a coarser grinder setting.