Switching on and off
25
Switching the coffee machine
on
Touch the On/Off
sensor.
The appliance will begin rinsing after
the heating-up phase. Hot water will run
out of the central spout.
When
Select drink
appears in the display,
you can prepare drinks.
If the coffee machine is already at
operating temperature, rinsing will not
take place.
If you do not touch any sensors or run
any maintenance programmes, the
display will switch itself off after approx.
7 minutes to save energy.
The right-hand LED will flash on and off
as long as the appliance is switched on.
Touch any one of the sensors to wake
the appliance up again to make a
drink.
Switching the coffee machine
off
Touch the On/Off
sensor.
If the coffee machine has been used for
making a drink it will rinse itself before
switching off.
If you have made a drink using milk,
Place milk pipe in drip tray
will appear in
the display.
Insert the end of the milk pipe into the
aperture in the drip tray, then touch
OK
.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday, please do the
following:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
Switch the machine off and, if
necessary, withdraw the plug to
disconnect it from the power supply.
Содержание CM 5310 Silence
Страница 71: ...Appliance dimensions INSTALLATION 71 a 241 mm b 360 mm c 460 mm ...
Страница 73: ......
Страница 74: ......
Страница 76: ...M Nr 11 557 710 00 en AU NZ CM 5310 CM 5410 CM 5510 CM 5710 ...