Problem solving guide
57
Problem
Possible cause and remedy
F73 or
Check the brew unit
The brew unit cannot be positioned correctly.
Switch the coffee machine off with the On/Off
sensor.
Switch off at the wall socket and remove the plug.
Wait for two minutes before inserting the plug
back in the socket and switching back on.
Remove the brew unit and rinse under warm
running water.
Push the coffee ejector of the brew unit into the
correct position (see diagram).
Do not fit the brew unit. Close the appliance door
and switch the coffee machine on with the On/
Off
sensor.
This will initialise the brew unit motor and put it back
into the start position.
When
Insert the brew unit
appears in the display,
open the appliance door and put the brew unit
back in the machine. Close the appliance door.
Содержание CM 5310 Silence
Страница 71: ...Appliance dimensions INSTALLATION 71 a 241 mm b 360 mm c 460 mm ...
Страница 73: ......
Страница 74: ......
Страница 76: ...M Nr 11 557 710 00 en AU NZ CM 5310 CM 5410 CM 5510 CM 5710 ...