Message
Possible cause and remedy
The message
SYSTEM
FILLING UP - START
appears in the display
again.
The coffee machine needs descaling and/or the brew
unit filters are blocked.
^
Switch the machine off with the On/Off button
-
.
^
Press the OK button for 2 seconds and call up
MAINTENANCE - DESCALE.
^
Descale the coffee machine.
^
Remove the brew unit and rinse under running
water (see "Brew unit").
If the fault message appears in the display again,
^
Degrease the brew unit (see "Cleaning the brew
unit")
If the fault message appears in the display again,
^
Call the Service Department.
The following message is
displayed on switching
on:
RINSE THE MILK SYSTEM
The milk system was not rinsed prior to switching off
last time.
^
Rinse the milk system (see "Cleaning and care -
Rinsing the milk system")
CLEAN THE MILK SYSTEM
will appear in the display.
The milk system needs to be cleaned.
^
Confirm this message by pressing the OK button.
^
Clean the milk system (see "Cleaning the milk
system").
DEMO MODE IS ACTIVE
or
DEMO MODE ACTIVE
FUNCTION DEACTIVATED
appear in the display.
The demo setting has been activated by the dealer.
^
Deactivate the demo mode (see "The Settings
menu" - "Demo mode").
Problem solving guide
67
Содержание CM 5200
