Frequently asked questions
137
Insufficient salt/water softener
Problem
Possible cause and solution
Refill salt
Salt is running low in the water softener.
Refill the reactivation salt before starting the next pro-
gram.
Machine locking Insufficient
salt
Salt in the water softener is completely used up and reacti-
vation is no longer possible. The machine is locked for fur-
ther use.
Refill with reactivation salt.
Salt container empty, Pro-
gram locked
The water softener cannot reactivate because there is in-
sufficient salt. The machine is locked for further use.
Refill with reactivation salt.
The machine is unlocked a few seconds after the salt
reservoir is refilled. Reactivation will occur automatically
during the next program sequence.
Salt container lid not closed
correctly
The salt container is not closed properly.
Close the container properly.
Salt residues are preventing it from closing.
Remove the residues from the refilling funnel, the lid and
the seal.
Do not use
running water as this can cause the
salt container to overflow.
Close the container properly.
The salt container flap has sprung open during a program.
When the door is opened, hot steam and process
chemicals can escape!
Open the door and close the container flap.
