Supervisor level
85
Time
After selecting the clock format, you
can set the time of day.
Clock format
– 24 h clock
– 12 h clock
– No clock
Set
– The time can be set.
Date
The date can be set after selecting the
date format.
Date format
– DD.MM.YYYY
– YYYY.MM.DD
– MM.DD.YYYY
Date
– The date can be set.
Volume
The volume for various signal tones
can be changed.
– Finish tone
– Keypad tone
– Welcome tone
The tones can be set to one of 7
different levels or switched off
altogether.
– Fault alarm
The fault alarm can be activated or
deactivated.
Visibility parameters
Various parameters, such as the
temperature, spin speed, Extras, etc.,
are displayed when a programme is
selected. You can decide which
parameters should not be displayed.
These parameters can then not be
edited during programme selection.
Factory setting: all parameters are
visible (marked in orange)
Sorting Extras
In the setting
Visibility parameters
,
Sort
Extras
appears in the bottom line.
Touch the sensor control to change
the sequence of Extras (see
“Supervisor level - Arranging
programmes”).
