Supervisor level
89
Special programmes
You can put together 5 special
programmes and save them as
washing programmes with your own
programme names.
You must have already activated
Special programmes under
Programme
packages
.
Enter the names of your special
programmes and their basic settings
into the “Special programmes” table
under the “Programme chart”.
– Temperature: You can select a
temperature in multiple increments
from cold to 90°C.
– Wash block: You can select one or
more wash blocks.
– Spin speed: You can select a spin
speed in increments from 600 rpm to
1400 rpm.
Sort programmes
Programmes can be moved within the
programme list and in the Favourites
list.
Factory setting: Off
Moving programmes
Touch the sensor control for the
programme you want to move.
Press and hold the sensor until the
frame changes.
Drag the programme to the required
position.
Prog. colour allocation
You can assign a colour to a Favourite
programme. In the Favourites list,
each Favourite programme is given a
coloured frame, which can be
adjusted.
Factory setting: On
Hygiene
The
Maintenance wash hygiene
programme is shown in the list of
special programmes.
If a programme at a temperature below
60°C has been used, the prompt to
start the
Maintenance wash hygiene
programme will appear in the display.
Factory setting: Off
Disinfection prog. code
A code needs to be entered to cancel
a disinfection programme. The code
can be changed.
The code is: 0 0 0
Make a note of your new code if you
ever change it.
