Cleaning and care of the oven
52
If you want to see how the Self Clean
program is progressing, you need to
highlight the duration symbol
in the
display.
Select
OK
.
If necessary, use
or
to move the
triangle
until it appears under
.
The time left for the Self Clean program
will start counting down on the display.
You cannot alter the duration.
You can use the timer while the Self
Clean program is running. When the
set time has elapsed, the audible
signal will sound and
will flash. The
time will then continue to increase on
the display. The audible signal will
stop and the symbols in the display
will go out as soon as you confirm
with
OK
.
and the number of the
selected Self Clean program will
appear again.
Starting Self Clean at a later time
Start the Self Clean program as
described above and then set the
required finish time within the first five
minutes of starting the program.
Select
OK
.
Move the triangle
with
or
until
it appears under
.
appears.
Confirm with
OK
.
The display will show the finish time
calculated from the current time of day
plus the duration of the selected Self
Clean program.
Set the desired finish time using
or
.
Confirm with
OK
.
The finish time is now saved.
The oven heating switches off.
The finish time can be changed at any
time up until the start time for the
program.
As soon as the start time is reached,
the oven heating and the cooling fan
will switch on. The duration will appear
in the display.
At the end of the Self Clean program
h
,
, and
will appear in the
display.
As long as
lights up, the door is
locked. When
flashes, the door is
unlocked.
When the door lock has been
deactivated:
-
goes out.
-
flashes.
- Short signals will sound if the audible
signal is switched on.
Turn the mode selector to
Off
.
The audible signal will stop and the
symbols on the display will go out.