Features
19
Universal tray and Wire Rack with
anti-tip safety notches
Universal tray HUBB 30-1:
Wire Rack HBBR 30-2:
Safety notches are located on the short
edges of the Wire Rack. These prevent
the Wire Rack from being fully pulled
out of the side racks when it only needs
to be pulled partially out.
Always slide the Wire Rack into the rails
of the side racks with the catches
facing down.
Tip:
When using the universal tray,
place it directly on the Wire Rack.
FlexiClips with Wire Rack
HFCBBR 30-2
The FlexiClips with Wire Rack are
mounted on the side racks and can be
pulled completely out of the oven. This
allows you to see the food easily.
The FlexiClips with Wire Rack are
pushed onto the rails of a level and then
locked into place.
The FlexiClips can support a maximum
load of 33 lb (15 kg).
The FlexiClips with Wire Rack can be
mounted on any shelf level.
Installing and removing the FlexiClips
with Wire Rack
Danger of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heater elements, oven compartment,
or accessories.
Allow the heating elements, oven
compartment, and the accessories to
cool down before installing or
removing the FlexiClips with Wire
Rack.
When installing or removing the
FlexiClips,
do not
extend them.
Hold the FlexiClips with Wire Rack
with both hands and position them in
front of the desired level.
