Miele professional IR 6001, Руководство по эксплуатации

Страница: 17 / 46

2. Starting a fixed program
^
Key switch to position I.
^
Turn main switch to I (On).
The pre-selected program appears in
the display field.
^
Press the START touch pad.
The l in operation indicator light
comes on to show that the machine is
running a program.
Note:
If several programs are required as
fixed programs, (i.e. switchable with
key setting I), consult the programming
manual under PROG-SELECTION.
The program parameters (codetext)
can be read off the display without
activating any further functions:
00 6 0 0 3 0 0 7 8 1 5 1 0
1 2 3 4
1. Program number
2. Current program step
3. Current temperature
4. Remaining step time in minutes and
seconds
Touch the MODE pad to see the current
program segment, (pre-wash, main
wash, interim rinse, final rinse, drying)
or the Codetext.
Program sequence
After starting, the program proceeds
automatically. It is finished when the in
operation light
l goes out.
y
The Fault-Error indicator light
will come on if the system has been
interrupted during operation.
The cause of the interruption is shown
in the display field as an error
message.
The following error messages are
possible:
ERR DOOR
The door has been opened during the
wash program.
ERR INFLOW
Water intake has been impeded (closed
valve, clogged filters, etc.)
ERR DRAIN
Water is not draining freely (kinked
hose, sewer blockage, etc.)
ERR TEMP
Temperature not reached in prescribed
time. Call Miele Technical Service Dept.
ERR T-SENSOR
Defective sensor. Call Miele Technical
Service Dept.
ERR PUMP-PRG
Programming fault: several pumps were
activated simultaneously in one
program step.
ERR KEY
Defective key switch. Call Miele
Technical Service Dept.
Operation
17