■HOW TO OPERATE
◆Ｈ－７５
①Loosen Knob and pull out Wire. (Do not pull out Wire any more if you find
“
red mark
”
on Wire.)
②Insert Wire to the pipe slowly and when Head reaches the blockage or Head cannot be inserted due to an
acute bend of the pipe, tighten Knob to hold Wire.
③Holding Grip by right hand, rotate Handle clockwise to clean the pipe.
④In case of heavy blockage, repeat to move Wire for and backward with rotating Handle clockwise and counter-
clockwise.
⑤When finished cleaning the pipe, pull back Wire to Wire Case with washing and spraying Wire with
anticorrosive oil.
(Optional Accessory : Rowonal R72142)
◆Ｈ－１５０
①Loosen Knob, pull up Chuck Handle to release Wire and pull out Wire. (Do not pull out Wire any more if you
find
“
red mark
”
on wire.)
②Insert Wire to the pipe slowly and when Head reaches the blockage or Head cannot be inserted due to an
acute bend of the pipe, push down Chuck Handle to hold Wire. Tighten Knob also when Wire cannot be held
by Chuck Handle.
③In case of heavy blockage, repeat to move Wire for and backward with rotating Handle clockwise and counter-
clockwise.
④When finished cleaning the pipe, pull back Wire to Wire Case with washing and spraying Wire with
anticorrosive oil.
(Optional Accessory : Rowonal R72142)
■HOW TO OPEN WIRE CASE
Wire Case can be opened when Wire is twisted in Wire Case or to clean the inside of Wire Case.
◆How to open
Loosen 4 pcs. of Stop Bolt A (Fig.1) and loosen 4 pcs. of Stop Bolt fixing Wire Case.
(Wire Case for H-75 is fixed with 3 pcs. of Stop Bolt.)
■HOW TO FIX HANDLE （Ｈ－１５０）
Insert Handle and tighten Stop Bolt with the attached
Allen Wrench.
Allen Wrench can be used to open Wire Case.
INSTRUCTION MANUAL
DRAIN CLEANER Ｈ－７５ DRAIN CLEANER Ｈ－１５０
①Wire Case ①Wire Case
②Knob ②Knob
③Wire ③Head
④Grip ④Chuck Handle
⑤Handle
⑤Handle
CLASSIFICATION OF CAUTIONS
WARNING ： Indicates a potentially hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION ： Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury or damage to the machine.
①
②
③
④
⑤
①
②
③
④
⑤
Fig.1
Stop Bolt
Handle
Ａ
ＩＭ８０１
