Miele professional IR 6001, Руководство по эксплуатации

Страница: 31 / 46

Before using the machine for the first
time, the MCU must be set by the
service technician to reactivate the
water softener according to the local
water hardness level (see Operating
and program manual). The local water
authority can advise you of the water
hardness in the area.
When, after a number of wash cycles,
the message REGENERIER
(REGENERATE) appears in the display,
the built-in water softener is depleted
and cannot supply any more soft water.
It must therefore be reactivated
with
regenerate salt immediately after the
program has ended.
If this cannot be done immediately and
further batches have been washed, the
reactivation process must be carried
out twice in succession.
For each reactivation program you will
need:
– 4.4 lbs. (2 kg) reactivation salt
(granule size must be 1-4 mm).
– The plastic salt container supplied as
standard equipment with the
machine.
Please note
Never use rock salt as the dirt
particles it contains will block the
water softener unit.
Reactivation salt with granules
smaller than 1 mm or larger than
4 mm must not be used.
,
The salt container must only be
filled with salt!
Filling the salt container with
anything but salt, such as detergent,
could cause pressure to build in the
salt container resulting in harm
(chemical burns, physical injury) to
the operator.
To fill the salt container
^
Unscrew and remove the filter insert
from the salt container.
^
Fill the salt container with granular
salt and replace the filter insert.
Reactivating the water softener
27