CropHawk Draper Platform Operators Manual 71
Storage Procedures
Storage
NOTE: Store the platform undercover on firm ground. Store the platform in a clean condition to prevent vermin living
within the platform. If platform is to be stored outdoors remove draper belts and store in a clean dry place to prevent
weather damage.
End of Season Service
IMPORTANT: Do not use high pressure washer spray directly on bearings, decals, or any
other
sensitive areas. High pressure water can remove paint, seals, lubricants and decals.
1.
Lower platform onto transporter or suitable blocks or raise and engage combine safety stops.
2.
Raise reel completely and engage safety stops.
3.
Loosen tension on outer draper belts (refer to
ADJUSTMENTS in OUTER DRAPER BELTS section of
this manual) .
4.
Lift up outer draper belts and clean inside belts.
Remove all dust and debris (see image).
5.
Remove centre feed belt and clean frame (Refer to
CENTRE FEED BELT section in this manual). Reinstall
belt loosely.
6.
Remove drum covers, clean and inspect for wear and
damage.
7.
Remove front gearbox cover and thoroughly clean gearbox. Remove all dust and debris.
8.
Open all doors and thoroughly clean ends of platform. Remove all dust and debris.
9.
Check and replenish all fluid levels.
10.
Lower reel completely.
11.
Shelter platform in a dry place.
Continued on next page
