CropHawk Draper Platform Operators Manual 61
Draper Belts
Continued on next page
Windrow Conversion
NOTE: Platform balance changes with windrow deck in set-up position
1.
Raise reel and engage safety stops.
2.
Disconnect and loop centre cartridge hydraulic lines
(A).
3.
Disconnect drum drive PTO and hook up to dummy
shaft provided (B), ensuring to set drum where
fingers do not foul windrow deck.
4.
Loosen windrow deck hold down grubscrews on
knife channel (C ).
5.
Swap windrow deck drive roller hydraulic hoses (D).
6.
Slide windrow deck fully towards centre of platform
checking it is not fouled by drum and centre feed
belt.
7.
Tighten windrow deck hold down grubscrews (C )on
knife channel.
8.
Reposition drive roller hydraulic hose clamp to
underside of the headboard.
9.
Run slowly and check.
10.
To return platform to normal harvest setup reverse
steps 1 to 9.
D
C
B
A
