Midway 40272, Руководство по эксплуатации игры

Страница: 86 / 93

Player Control Troubleshooting Table
SYMPTOM
Intermittent or completely
non-functional player
.
Video Game Machine
starts normally.
Steering pulls to one side
No wheel feedback
Steenng aims vehicle as
expected
CAUSE
Faulty switches or
lamps
Faulty switch
Faulty Wheel Driver
3 o a r d
mproperly set
circuit
motor
REQUIRED ACTION
1 . Press and hold TEST MODE corn
door to enter Menu System. Select SWITCH
TEST from Diagnostic Menu. Conduct tests to
confirm switch and lamp operation.
2. Check for loose parts or wires caught in switch
contacts.
3. Check at each connection
(Common to Normally Open or Common to
Normally Closed).
4. Verify player control operates properly by
it in working VGM.
5. Verify light bulbs used for dashboard switches
are type specified in pans Other types
but may produce too much heat. Excess
heat may cause switches to bind.
1. Check for caught door latches
or switch contacts.
2. Verify harness connectors are attached and full)
seated.
3. Assure switches connect properly tc
control input wires.
4. Check cabinet wiring is correct for this VGM.
Find power amp on Wheel Driver Board’s large
Test and replace bad part or board.
Select STEERING WHEEL TEST on the
Diagnostics Menu.
2. Set feedback to match player requirements.
Maximum force may be too extreme for very
young or Inexperienced customers.
Examine fuses and cables on Wheel Driver
Board.
Check cables and wiring between CPU board,
wheel driver and motor
3. Check resistance of motor series
Replace bad parts.
I. off power. Open dashboard. Support
steering wheel and remove outer mounting
screws.
Remove metal (if VGM has one) over
motor.
3. Unscrew caps.
Inspect motor brushes. Replace worn parts.
Troubleshooting 9