Midway 40272, Руководство по эксплуатации игры

Страница: 85 / 93

Linking Problem Troubleshooting,
SYMPTOM CAUSE
Some Video Game
Machines
i n t h e
group link
properly, while
others do not.
Improper hub switch
setting
Wrong software
version
Faulty wiring
(2
Faulty wiring
(3 or more
REQUIRED ACTION
I
1 . Assure switches on hub are set according to Hub
Link Kit Instructions. (Networked
do not
require couplers. Hub has crossover.)
2. Inspect hub indicator lights for link activity.
manufacturer’s literature for diagnostics.
Verify all linked use same of
software. Error message “VERSION MISMATCH”
will appear if you try to link different versions.
Contact your
1. Insert crossover connection between coupled
Standard couplers appear identical to
devices supplied with games, but do not include
an internal crossover.
2. Verify each linking crossover coupler operates
properly by placing it in a working link between
two
1 . Use an additional crossover connector and cable
to extend game or hub link connection. Two
crossovers cancel each other out and results in
same problem as no link crossover.
2. Connect cables directly to hub. Do not use a
crossover coupler and hub together in
network.
3. Separate communications from other
wiring. Wires that must cross can only cross at
right angles to limit noise pickup.
CAUTION
Do not remove or install any connector when power is turned on. Installation under
.
power will damage the circuit boards or hard disk drive and void the warranty.
8