Midway 40272, Руководство по эксплуатации игры

Страница: 84 / 93

Linking Problem Troubleshooting Table
SYMPTOM
Cannot connect multiple
Video Game Machines
together
VGM does not recognize
other players in linking
operation
VGM functions normally
by itself
CAUSE
Faulty
Improper linking
hardware
Improper settings
Power problem
Faulty wiring
or more
REQUIRED ACTION
1 . Do not extend linking cables supplied with VGM.
2. Install required crossover between cabinets.
Each coupler connects two pair].
not use standard telephone type couplers or
f o r
3. Use only 10 Base-T, Ethernet-type, Category 5,
twisted-pair wiring.
Use required network hub for your local network.
A H u b K i t u p t o V G M
connections. Array requires kit
brackets and spacers.
1. Record any error messages that occur
self-test.
2. From the Diagnostic Menu select DIP SWITCH
T E S T . the link is enabled.
3. Be sure that each VGM has a unique ID number.
4. Select LINKING TEST from the Diagnostic
menu. Run tests for each linked VGM.
Verify the hub power. AC adapter wires
are thin and easily damaged.
1.
Inspect hub Indicator lights. indicator
lights for each light up the cable(s)
are properly connected. Check for cable
continuity from hub to VGM for each Indicator
that
to light.
2. Assure no loose wires are caught in
doors or under cabinet.
3. linking cable connects to CPU Board for
each game.
4. each linking cable operates properly by
it in working game.
CAUTION
Do not remove or install any connector when power is turned on. Installation under
l
power will damage the circuit boards or hard disk and the warranty.
Troubleshooting 7