HYB-1000 KIT
If you use the ARROW keys to select option buttons, press
the NEXT soft key to continue to the next step. If you use the
alphanumeric keypad to enter the number preceding the
option button, no additional keypress is needed to save your
selection. The BACK soft key returns you to the Main Menu at
the start of the test and to the previous screen as you progress.
1. In the Main Menu, select the Battery Test icon.
Highlighted aux Battery Icon
2. Select the LOCATION.
1
OUT OF VEHICLE
2
IN VEHICLE
Press the NEXT soft key to continue.
3. Select the POST TYPE
1
TOP
2
SIDE
4. Select the BATTERY CHEMISTRY.
1
FLOODED
2
AGM
3
AGM-SPIRAL
Press the NEXT soft key to continue.
5. Select the battery’s RATING UNITS. The units and the rat-
ing required in step 6 are printed on the battery label. If
the information is unreadable, contact the battery manu-
facturer.
1
CCA (Cold Cranking Amps)
2
CA (Cranking Amps)
3
MCA (Marine Cranking Amps)
4
JIS (Japanese Industrial Standard)
5
DIN (Deutsch Industry Norm)
6
SAE (Society of Automotive Engineers)
7
IEC (International Electrotechnical Commission)
8
EN (European Norm)
Press the NEXT soft key to continue.
6. Press the UP (
) or DOWN (
) ARROW key or use the
numeric keys to select the BATTERY RATING.
a) If CCA, scroll to the rating and press SELECT. The
entry range is 100 to 3000, except for DIN and IEC,
which have a range of 100 to 1000.
500
CCA
b) If JIS, scroll to the JIS number.
26A17
26A19
26B17
28A19
Press the NEXT soft key to continue.
7. Aim the IR temperature sensor at the battery as instructed
for an accurate temperature measurement.
Battery Case
(Top)
Sensor
Measuring Battery Temperature
When the temperature stabilizes, press the NEXT soft key.
The analyzer begins to the test battery. The test will take
a few moments to evaluate the battery before the results
are displayed on the screen.
In some cases the HYB-1000 may ask for additional information
before it makes a decision on the battery. See the “Additional
Test Requirements” section for more information.