background image

 

7

 

Chapter 1: Before You Begin

!

Safety

Because of the possibility of personal injury, always use extreme caution when working with 
batteries. Follow all manufacturers’ instructions and BCI (Battery Council International) safety 
recommendations.

General Precautions

• 

DANGER—RISK OF EXPLOSIVE GASES:

 Batteries can produce a highly explosive mix 

of hydrogen gas and oxygen, even when the battery is not in operation. Always work in a 
well-ventilated area. 

Never smoke or allow a spark or flame in the vicinity of a battery.

• 

WARNING—REQUIRED BY CALIFORNIA PROP. 65:

 Battery posts, terminals, and 

related accessories contain lead and lead compounds, chemicals known to the state of 
California to cause cancer and birth defects or other reproductive harm. 

Wash hands 

after handling.

 

• 

Battery acid is highly corrosive. If acid enters your eyes, immediately flush them thoroughly 
with running cold water for at least 15 minutes and seek medical attention. If battery acid 
gets on your skin or clothing, wash immediately with water and baking soda.

•  Always wear proper safety glasses or face shield when working with or around 

batteries.  

•  Keep hair, hands, and clothing as well as the analyzer cords and cables away from 

moving engine parts.

•  Remove any jewelry or watches before you start servicing the battery. 

•  Use caution when working with metallic tools to prevent sparks or short circuits.

•  Never lean over a battery when testing, charging or jump starting it.

Conventions Used in This Manual

To help you learn how to use your analyzer, the manual uses these symbols and typographical 
conventions: 

The safety symbol followed by the word 

WARNING

 or 

CAUTION

 indicates 

instructions for avoiding hazardous conditions and personal injury.

The word 

CAUTION

 without the safety symbol indicates instructions for 

avoiding equipment damage.

The wrench symbol indicates procedural notes and helpful information.

The text for keypad buttons and soft-key functions are in bold capital letters.

The text for screen options are in regular capital letters.

!

CAUTION

UP ARROW

POST TYPE

Chapter 1: Before You Start

Содержание EXP-717


































Отзывы: